Joomla Templates and Joomla Extensions by JoomlaVision.Com

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems
KFS

SCP Series

SCP Series

 

Parameters

Qmax: 3,400 m3/h (Higher volume flow up to 17 000 m3/h as special version)


Hmax: 245 m



Design

Axially split case pump mounted on a baseplate

 

Application

  • Pumping heating water in accordance with VDI  2035 water/glycol mixtures, cooling/cold water and secondary hot water
  • Applications in municipal water supply, irrigation, building services, general industry, power stations, etc.

 

Type key

 

Example SCP 200/250HA-110/4
SCP Axially split case pump
200 Nominal diameter of pressure port
250 Impeller nominal diameter
HA Hydraulics type A
HB Hydraulics type B
HS Single suction impeller
DS Two-stage pump
DV Double volute
110 Nominal motor power P2 [kW]
4 4-pole pump

 

Special features/product benefits

  • Easy maintenance (without removing the pressure or suction pipes)
  • Low NPSH value (thanks to double suction impeller)
  • Longer service life (load is distributed to bearings)
  • Both directions of rotation are possible (clock-wise and anti-clock-wise)
  • Permanently lubricated bearings

Description/design

  • Centrifugal axially split case pump, available in single-stage and two-stage design.
  • Delivered as complete unit (pump with coupling, coupling protection, motor and baseplate) or without motor or only pump hydraulics
  • Shaft seal with mechanical seal or stuffing box
  • 2-pole, 4-pole and 6-pole motors; standard version 50 Hz

 

 

Materials

  • Pump housing: EN-GJL-250
  • Impeller: G-CuSn5 ZnPb
  • Shaft: X12Cr13

 

 

Scope of delivery

  • Pump
  • Installation and operating instructions

 

 

Options

  • Other motor versions on request
  • Higher volume flow up to 17 000 m3/h as special version
  • Special motor (6000V, 10 000 V etc.)
  • Special construction
    • Impeller: Bronze, grey cast iron, stainless steel
    • Housing: grey cast iron, spheroidal cast iron
  • Cyclone separator (for flushing the gasket)