Joomla Templates and Joomla Extensions by JoomlaVision.Com

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems

Kinetic Flow Systems Kinetic Flow Systems
KFS

Wilo-EMU FA (standard variant)

Wilo-EMU FA (standard variant)

Parameters

 

Qmax: 380 m3/h


Hmax: 42 m

 

Design

 

Submersible sewage pump

 

 

Application

 

  • Pumping of sewage with solid constituents in water treatment systems and pumping stations
  • Local drainage, water control and process water extraction
  • Applications in construction and industry

 

 

Type key

 

e.g.: Wilo-EMU FA 08.22W-133+T12-2/11
FA Submersible sewage pump
08 Nominal diameter of pressure port DN 80
22 Performance indicator
W Impeller shape(W = vortex impeller, E = single-channel impeller)
133 Impeller diameter [mm]
T Motor version
12 Overall size
2 Number of poles
11 Package length [cm]

 

 

Special features/product benefits

 

  • Operation in stationary and portable wet well installation
  • Heavy-duty version made of grey cast iron
  • Easy installation due to suspension unit or pump base
  • Longitudinally watertight cable lead-in
  • Cable length 10 m
  • ATEX approval

 

 

Technical data

 

  • Mains connection: 3~400 V, 50 Hz
  • Immersed operating mode: S1
  • Surfaced operating mode: S1, S2-15 or S2-30 (depending on type)
  • Thermal motor monitoring
  • Protection class: IP 68
  • Insulation class: F
  • Fluid temperature: 3 - 40 °C
  • Cable length: 10 m
  • Free ball passage from 6 mm to 100 mm
  • Permanently lubricated anti-friction bearing
  • Max. immersion depth: 12.5 m

Equipment/function

 

  • Stationary dry well installation possible for short-term operation, S1 and S2 (depending on type)
  • Heavy-duty version made of cast iron
  • Simple installation via suspension unit or pump base

 

 

Description/design

 

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation.
Hydraulics
The outlet on the pressure side is designed as horizontal flange connection (except for FA 05.11W). The maximum possible dry matter content is 8%, depending on the hydraulics and impeller type.
The following impeller shapes are used:
  • Vortex impeller (W)
  • Single-channel impeller (E)
Each single-channel hydraulic system (E) is equipped with a counter ring and stationary wear ring made of hardened material (except for FA 08.41E). These ensure the consistently high efficiency of the unit for a long duration.
Motor
Dry motors(T motors) give off their heat directly to the surrounding fluid via the housing components and can be used in immersed state for permanent operation. Depending on the size, they can also be used in non-immersed state for short-term operation.
The oil-filled motors (FA 05.11W and FA 05.33E) give off heat directly to the pumped fluid via an integrated heat exchanger. As a result, these motors are suitable for permanent operation either in immersed or non-immersed state.
All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can be monitored with an optional sealing chamber electrode.
All filling fluids used are potentially biodegradable and environmentally safe.
The cable inlet of the T motors is longitudinally watertight. The cable length is 10 m.
Sealing
Fluid-side and motor-side sealing is possible in the following versions depending on the motor type:
  • Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side
  • Version G: Two independently operating mechanical seals

 

 

Materials

 

  • Pump housing: EN-GJL-250
  • Impeller: EN-GJL or EN-GJS
  • Static seals: NBR
  • Mechanical seal on pump side: SiC/SiC
  • Mechanical seal on motor side: SiC/SiC (depending on type)
  • Rotary shaft seal on motor side: NBR (depending on type)
  • Motor housing: EN-GJL-250
  • Shaft: Stainless steel 1.4021

 

 

Scope of delivery

 

  • Pump ready for connection with 10 m connecting cable without plug
  • Installation and operating instructions

 

 

Accessories

 

  • Suspension unit or pump base
  • Various pressure outlets and Storz couplings
  • Chains
  • Switchgears, relays and plugs